CB-Radio desk stand for President Walker 2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a desk-stand for the President Walker 2 CB Radio.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 61
- Makes
- 0
- Views
- 482
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The stand is designed for m3 threaded inserts. The legs are attached via m3 bolts and nuts and are collapsible. The feet should be printed in TPU and superglued to the housing/legs.
The original mounting screws are used to keep the radio fixed in the stand. Use a coin to screw them in.
The mic-plate can be mounted on the left or on the right (add threaded inserts on the side you choose, the microphone bracket holes are also available for both orientations).
The handles are friction fit into the main housing. The tolerances of your printer should be calibrated well.
There are two versions of the foot to choose from. One with a solid bracket and another one with honeycomb structure.