1 / 3
longboard wall mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
I made this moddel in freecad in a few minutes, so nothing big. my longboard has a really flat deck, so if yours is more concave or has a kicktail it might not work. Should be printed at at least 2mm Wall thickness and 20% Infill to be stable enough. It uses 4 screws (2 each). Obviously must be printed twice, one for the back and one for the front.