Irwin Jab saw / drywall saw sheath
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sheath for Irwin jab saw.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 64
- Makes
- 0
- Views
- 216
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Public Domain
This is a fancy sheath for an Irwin jab saw. Made it out of PETG.
Fits a 1.55mm blade but should fit most saws.
You can print 2 tone colours like I did (use superglue to join together) or you can just print the main body
I have included the fusion file if you are keen to play around. Change saw thickness to your saw thickness +1mm. Friction plate is set to 1mm. If the saw is too loose increase value, if the saw is to tight decrease value. if you want to change the file significantly I recommend using it as guide
This went through 4 prototypes. FOUR! I overdid it a bit (so naturally the timeline is a mess)
Feel free to ask any questions.
