Eufy Robovac Height Extension
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.36 – €0.43 net (excluding VAT)
For file: EufyRobovacHeightExt_0.4n_0.28mm_PLA_MK4S_12m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.39 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 12 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
An easily printed height extension for the Eufy 11S to prevent it getting stuck under furniture
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 59
- Makes
- 2
- Views
- 746
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Eufy Robovac 11S is frequently getting stuck under furniture edges. This design adds 13mm to the outer edge of the robovac's front sensor, helping to prevent it from getting too close to narrow openings.
PRINTING:
Print the pieces with the flat top against the print plate. I printed with PLA, but any solid filament should work.
MOUNTING:
I printed 5 of these and mounted them with superglue to the top of the front sensor.