1 / 3
Cover, 4 inch hole in 1/2 drywall
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cover for a hole cut with a 4 inch hole saw in drywall
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 47
- Makes
- 0
- Views
- 162
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Covers a 4 inch diameter hole in ½ drywall. Nice snug fit, but I probably a little too stiff to be easy to remove and reinsert with PLA. If that is your need, you might try reducing the walls to 1 layer above the cover face and printing with PETG.
It helps to break off one of the tabs and twist it in to get the side that isn't missing any tabs in. The you can tap it in place with a board and mallet.