Arca-Compatible Tripod Plate for Basler Racer Camera
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D-printed Arca-compatible tripod plate that can be mounted on both the long and short sides of the camera.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 58
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
Arca-Compatible (38 mm dove tail) mounting plate. Can be mounted to the long side (49 mm hole spacing ) or the short side (43 mm hole spacing) to use the camera horizontal or vertical. It mounts to the camera with M4 cylinder head screws (8 or 10 mm).
The bottom has provisions for adding two M3 6 mm cylinder head cap screws to prevent the camera coming loose - like most quick release plates have them.
As a backup the bottom also has a ¼"-20 internal thread for use with a different tripod mount. When using the 1/4"-20 thread, the two M3 screws must not be installed.
I recommend printing at 100% infill for maximum strength.