Shower head extension V2
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.60 – €1.95 net (excluding VAT)
For file: Shower Extension2_0.4n_0.2mm_PLA_MINIIS_1h21m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.77 excluding VAT (range midpoint).
- Weight reported by the author
- 31 g
- Print time reported by the author
- 1.35 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Extend the shower head away from the wall
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 134
- Makes
- 2
- Views
- 758
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
This extends the shower head away from the wall.
Our shower is on the wall over the bathtub, the curvature of the bathtub was preventing me from standing fully under the shower.
There is minimal support under the body to prevent if from moving and center support under the tapered cylinder end.
I printed it with a 10% 3D honeycomb in fill.
I added an “O” ring to mimic the existing shower head (This is optional)
Version 2
After 3 year the walls started to crack. So I remix the model for better wall structure
Inspired by
Svensson2584 remix of my model https://www.printables.com/model/984723-shower-head-extension-remix
I incorporated a flat bottom to remove the need for supports. You still need supports on the tapered end.