1 / 3
Smaller Cable Grommets
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Some smaller sizes of the original model.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 10
- Makes
- 1
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
See the source model for usage instructions. The largest of the three pictured is the original size.
I made these smaller flexible passthroughs thinner to be more flexible but did leave a full height ring to screw onto.
I reccomend a layer height of 0.2mm for printing the flexible passthroughs since the flap thicknesses are .6mm and .8mm.
A smaller layer height for better detail in the threads would probably be better. I used 0.16mm.
No supports are required.