1 / 1
Simple Wheel of Fortune, einfaches Glücksrad
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple Wheel of Fortune. You can write anything on the Surface.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 38
- Makes
- 0
- Views
- 280
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
Requires a Bearing for a smooth spin! I recommend an SKF 6004, but you can use every similar bearing.
Bearing dimensions:
Outside diameter: 42mm, Bore: 20mm, Width: 12mm
The Pointer should be TPU, printed with a 0,4mm nozzle. I used Extrudr medium TPU.
Wheel can be printed with two colors.
Assembly:
- put the Bearing into the base
- Glue the Top piece onto the wheel to fix the bearing
- Let the glue dry
- Push the Base into the bearing. If it does not fit, use sandpaper until it fits. If it is loose, use glue
- Slide the pointer into the slot. You can carefully use a hammer. If it is loose, use glue.