XReal One Pro Ear Supports
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Some things I made to enhance my XReal One Pro wearing experience, I'm NOT SURE if the Xreal One has the same measuremen
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 73
- Makes
- 0
- Views
- 1,307
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
My Xreal One Pros were at a bad angle, I noticed it was because the “ear grooves” in the arms were too deep, so I made some stands that can stand it up higher.
Then I noticed that the glasses slowly slid down my nose like all glasses tend to, so I made an anchor to secure a cord to so I can tied it on my head securely.
I included 2 stands of 10MM and 15MM, this is refering to the height of the ‘legs’. The “longer” legs cover more of the ear valley and feels more comfortable to me.
These items are intended to be printed in TPU especially the stands, since you need to open them up to fit them in the glasses.
For reference TPU I used is at a hardness scale of 95A.
Print things flat with the ‘O’ facing up on the plate.