Maximum Mass Nerf Infinus Cage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A flywheel cage that prints up to about 80g in weight, for dampened sound.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 17
- Makes
- 1
- Views
- 100
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Public Domain
Nerf Infinus cage. Comes only in 41mm spacing, meant for use with daybreak wheels. Made exactly for the purpose of getting the quietest blaster I could at HVZ levels, mostly through tripling the mass of the flywheel cage, to up about 80g, and increasing the stiffness. The tolerances are nonexistent to minimize vibrations, making it basically an interference fit on any other printer. The good news, though, is that it is indeed much quieter with 2s Krakens, which is what I tested them with.
Outdated .STEP file provided, I forgot to save the newest one before shutting my computer off.
Fits the Protean BCAR, found at https://www.printables.com/model/815521-protean-modular-takedown-blaster. You will need to trim the faux barrel shorter.
Based on Kuryaka's v3.x infinus cage, but I found that the upper right hole was about 3 mm off where its supposed to be. It's still not perfect, but there's no step file because I forgot to save my files.