1 / 4
Case for TP4056 lithium charger with strain relief — image 1
1 / 4

Case for TP4056 lithium charger with strain relief

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Case for TP4056 Lithium charger with strain relief

Rating
4.667 / 5
Likes
41
Downloads
298
Makes
3
Views
876
Reviews
3

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Share Alike

Added strain relief feature to the original design. The case is longer to accommodate zip-tie, but it's pretty minimal (4mm longer). Need re-orientation, but can print without any supports.

Printing filament: Original designer called for more heat-resistant filament, but I've used the case in PLA for months without any issue perhaps thanks to designed air gaps.

Model selection: Use “large exit” version if you have 4 wires comming out and the standard version for 2 wires. (I used 24awg, but anything smaller than 20awg should work.)

Tags