Deep Rock Galactic - HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remake of an iconic cover of DRG using HueForge.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 5
- Makes
- 0
- Views
- 177
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.56mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.44mm
Filaments Used:
#000000 PLA eSun Black Transmission Distance: 0.1
#aa2316 PLA eSun Red Transmission Distance: 2.9
#ffff27 PLA eSun Yellow Transmission Distance: 4.8
#ffffff PLA Elegoo White (MATTE) Transmission Distance: 5.3
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #13 (0.64mm) swap to Black
At layer #19 (0.88mm) swap to Red
At layer #46 (1.96mm) swap to Yellow
At layer #48 (2.04mm) swap to White (MATTE)
At layer #52 (2.2mm) swap to Red for the rest.