Evolv Shift Front Panel with Fan Cuouts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The assembled panel is 471mm tall, so you'll either need a large print surface, belt printer, or be prepared for lots…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 250
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
The assembled panel is 471mm tall, so you'll either need a large print surface, belt printer, or be prepared for lots of post-processing.
I printed these as separate pieces, used a heat gun to press Fusion.stl into position to hold the pieces in alignment, and then a 3D pen along all the part seems. From there, it's just a matter of applying several coats of sandable primer and sanding down smooth.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
25%
Filament: PLA PLA Black
Category: Computer