1 / 1
OSWW Drive Gear (additional winders)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extending the gear idea for additional winders
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 44
- Makes
- 0
- Views
- 442
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I loved the idea of replacing the band drive with gears posted by OMPEd.
But I also wanted to run multiple winders of a single motor.
So I extended it with this extra gear that used bearings.
The components you need to replicate my setup are.
- 2 x high_position_tensioner_pulley_mount_v1.stl by OSWW - The Open Source Watch Winder
- 2 x Winder Gear.stl by OSWW Drive Gears (band replacement)
- 1 x Motor Drive Gear.stl by OSWW Drive Gears (band replacement)
NOTE: I increased the z size to 15mm (this is optional but I found it easier to run) - 2 x Winder Gear Bearing.stl (found in this make)
- 2 x 608ZZ bearings