1 / 3
Pokemon Alolan Vulpix - HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
One of my personal favorites, the Alolan variant Vulpix!
Check out my page for some other HueForge designs and prints!
Print Instructions:
- Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
- The Model is 133.33x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.2121mm
- Filaments Used: Black, Sapphire Blue, Sky Blue, White
Swap Instructions:
- Start with Black
- At layer #8 (0.72mm) swap to Sapphire Blue
- At layer #12 (1.04mm) swap to Sky Blue
- At layer #17 (1.44mm) swap to White for the rest.