1 / 1
SKÅDIS Paper Storage T-Clip Remix
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A4 paper storage with SKÅDIS style front and T-Clip System for fixing.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 24
- Makes
- 1
- Views
- 177
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Built using two main parts so it will fit on smaller printers, with the only difference of one part being a mirror version. They are assembled using two small Ø4,6mm pins. Then assembled to the SKÅDIS pegboard using these low profile T-Clips https://www.printables.com/model/1215997-low-profile-t-clip-for-ikea-skadis (four of them).
Printing instructions:
Mirror one of the main parts in slicer to make both needed parts.
Supplied STL files are orientated in the best way to be printed.
| Material | PLA or PETG |
|---|---|
| Nozzle Diameter | 0.4mm |
| Layer Height | 0.2mm |
| Perimeter / Wall Count | 2 or more |
| Infill Type | Any |
| Infill Percentage | > 20% |
| Support | Needed |