SOVOL Zero Prusa Slicer Profile - EXPERIMENTAL
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An Experimental profile for the Sovol Zero Printer to be used within PrusaSlicer.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 100
- Makes
- 0
- Views
- 413
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
It took forever, but I have manually ported over much of the Sovol Zero profile settings from OrcaSlicer to PrusaSlicer.
This configuration bundle INI file should include the following:
- Printer Config: SOVOL Zero - SV Zero
- Print Settings: .40 Nozzle-Brass
- Filament: SOVOL Zero - Silk PLA
It's experimental, but I think that the bulk of the settings are there and I end up with nearly identical products when sliced between the two slicers. If anyone has any ideas on how to add things like fan and lighting control, some of the other chamber temperature settings and the like, please feel free to add them. I will likely revisit this in the future, but for now, I'll probably just use 2 Slicers until a more official beta is added to Prusa Slicer
NOTE: Not all settings available in Orca Slicer seems to be available in Prusa Slicer. Not sure why that is, but things like the Auxiliary part cooling fans do not exist, lighting control, certain upper and lower limits for speeds, accelerations and so on are also different or just missing between slicers. USE AT YOUR OWN RISK.
I am providing a basic, small print as an example 3mf to try the profile on your own machine. I look forward to seeing the makes and tuning to the profile.