Puck Screen Remover V3 - easy release for 51mm & 58.5mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A magnetic tool to easily handle and remove hot puck screens. The spring-loaded button ejects the screen cleanly
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 27
- Makes
- 3
- Views
- 453
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Required Parts (BOM - Bill of Materials):
Screw: 1x M3x10mm self tapping Countersunk (Stainless steel recommended)
Spring: 1x Compression Spring 9.5x16mm (Wire dia. 0.5-1mm)
Shorten the Spring to about 2/3 of its length! This reduces the force on the layers of the "push" component
Magnets: 3x Neodymium Magnets. Choose one size:
15x4.5mmOR 10x3mm (Magnets are press-fit. A drop of superglue can be used for extra security.)
Print Settings:
Material: ABS, ASA or PETG (recommended for heat resistance)
Walls: 3-4
Infill: ≥ 25%
Layer Height: 0.2mm