1 / 1
Zerowater to 5 Gallon Bucket Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter to allow the production of 5 gallons of 0ppm water at a time.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 33
- Makes
- 0
- Views
- 274
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For keepers of plants who require 0 ppm water but do not have RO system or for thirsty bit-… anyway.
Produce up to 5 gallons of pure water at a time and free yourself from the shackles of smaller water pitchers.
Print:
- 1x of each: nut and threaded insert
- 3x or 4x: bucket support
Required:
- 2x 5-gallon buckets
- 3 mm Rubber sheet (I used neoprene, optional depending on flatness of bucket floor)
- Zerowater filter
Instructions:
- Cut hole in bottom of one bucket using sharp box cutter or thick exacto knife
- Use insert to cut neoprene gasket (if using) sized to groove along bottom.
- Insert gasket onto threaded component
- Insert assembly of gasket and threaded component through hole in bucket
- Tighten nut (hard) to pinch bottom of bucket and gasket
- Screw water filter into threads (don't overdo it)
- Space bucket supports around rim of second bucket
- Place bucket with filter onto supports
- Fill top bucket and enjoy water production