YAB - Yet Another BCAR ! Hi FPS, 3x6 + 5x6 at 8 degrees, 7 crush, with Silly Collet and Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
YAB - Yet Another BCAR ! Hi FPS, 3x6 and 5x6 at 8 Degrees, 7 Crush, with Silly Collet and Cover - slips on.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 4
- Makes
- 0
- Views
- 81
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
YAB - Yet Another BCAR !
Hi FPS, 3x6 and 5x6 versions at 8 degrees, 7 crush, with Silly Collet and Cover - slips on and self centers. The cover has tines on the inside that rest between the BCAR and the locking collet.
Modified my existing designs for a recently built ONTOS with a big spring. The (not original) idea was less aggressive angle to minimize FPS loss but more bearings. With a 1.6x300mm spring, a great seal and no spacers it hits 275-ish with new Work Gen3 half darts. At about 100 feet both versions where about the same in accuracy (pretty great for a printed BCAR) and FPS. I would guess the 5x6 is not really needed until over 300 FPS.
Yes, this is not unlike the APEX CNC's BCAR and the Cover has a passing resemblance to the HIKARI. No geometry or measurements where borrowed however. I don't have either so it's not an issue. The cover is friction fit. The front end has centering shape which lines up with the BCAR front. This was my KISS solution.
Printing - Nothing special. Obviously, It needs to be stiff - 5 walls / 20% infill. I printed with PTEG and PTEG-CF.
Assembly - also what you would expect. Clean up holes if needed, add bearing and then secure with grub screw (link below). I pref grub screws over reg screws so you don't damage the printed body if you accidentally over tighten with an electric screwdriver (huge time saver if you make more than one).
Tip: If you get your bearings from AliExpress - soak them in WD40 or similar. They ship with a weird waxing coating which is probably good for rust protection but crappy for actually spinning. This makes a huge difference.
Nice finishing touch to your primary. Cheers !
--------------------------------------------------------------
Grub screws:
https://www.aliexpress.us/item/3256804929728646.html?spm=a2g0o.order_list.order_list_main.17.688a1802S2g66P&gatewayAdapt=glo2usahttps://www.aliexpress.us/item/3256804929728646.html?spm=a2g0o.order_list.order_list_main.17.688a1802S2g66P&gatewayAdapt=glo2usa
Bearings:
https://www.aliexpress.us/item/2251832820283302.html?spm=a2g0o.order_list.order_list_main.22.688a1802S2g66P&gatewayAdapt=glo2usahttps://www.aliexpress.us/item/2251832820283302.html?spm=a2g0o.order_list.order_list_main.22.688a1802S2g66P&gatewayAdapt=glo2usa
Hikari BCAR:
https://www.printables.com/model/830611-hikari-103-nerf-blaster-bcar-with-quick-releasehttps://www.printables.com/model/830611-hikari-103-nerf-blaster-bcar-with-quick-release
