1 / 1
Bill Mauldin WWII Jeep cartoon
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Soo simple, just black and white
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Project: mauldincomic.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 140x171.71mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.44mm
Filaments Used:
#000000 PLA+ Esun Black Transmission Distance: 0.1
#ffffff PLA Polymaker Polyterra Cotton White Transmission Distance: 3.4
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Cotton White for the rest.