1 / 3
Anbernic RG35xxsp Dock - USB-C, HDMI — image 1
1 / 3

Anbernic RG35xxsp Dock - USB-C, HDMI

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A dock for the Anbernic RG35xxsp handhelds. Can be built with either USB-C, HDMI or both.

Rating
5 / 5
Likes
6
Downloads
64
Makes
1
Views
336
Reviews
1

Updated at source:

Model information

Category
Video Games
License
Creative Commons — Attribution

Designed after the work of IamDroBro (and mb also Emotional-Priority49) on Reddit for the RG35xxsp.

This dock suits the RG35xxsp - check your model no.

Hardware required:

  • 4x M3x8-12mm countersunk bolts
  • 4x 4.5mm(w) x 5mm(d) M3 threaded heat inserts
  • 4x 5-8mm x 2mm rubber pad feet/bumpers
  • 1x set 60g wheel-balancing weights (optional) (https://i.imgur.com/mEuuYMw.pnghttps://i.imgur.com/mEuuYMw.png)
  • 1x mini-HDMI to HDMI right-angle adapter, part C8K-05 (aliexpress)(check orientation is correct!)
  • 1x USB-C right-angle adapter (aliexpress, but must look identical to this one https://i.imgur.com/4Fb0DyA.pnghttps://i.imgur.com/4Fb0DyA.png)

It's important to get the exact adapters mentioned/pictured or they won't fit the model. I have allowed for tolerances where possible. The weights can be added to make the dock heavier, but are not strictly needed.

A model is also attached for the two adapters (slightly oversized, again for tolerances) should you wish to use them as toolbodies and design your own dock. The two adapters in the model are in-position relative to one another for the RG35XXSP.

(Note: i have a dock for the RG34xxsp here - https://www.printables.com/model/1411240-anbernic-rg34xxsp-dock-usb-c-hdmihttps://www.printables.com/model/1411240-anbernic-rg34xxsp-dock-usb-c-hdmi)