1 / 2
Eurorack rails
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
20HP and 4HP eurorack modular rails to create the usuals comertial lengths. Includes simple and double rails.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 38
- Makes
- 0
- Views
- 254
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
This is a modular, printable, Eurorack rails system. Includes 20HP and 4HP rails to create the usuals commercial lengths. Includes simple and double rails.
The holes are for 3M*4*4.6 brass heat inserts nuts.
Accepts M3 square nuts in the rails to ensure a reliable use.
Print one star, one end, and all the middle sections you need to reach the commercial length of your desire.
You can attach it to a case or any other place you need through M3 screws and the brass heat inserts.
PRINTER SETTINGS
- 60m/s speed for the outer wall (there's many sharp corners and it's best to avoid bulging corners).
- No support: Plate it vertically with the side plate side facing the printer's plate).
- 10% hex infill.
- 0,4 nozzle and 0,2 layer heigh.