Remnant SCAR with Tensioner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SCAR but with a toolless tensioner
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 7
- Makes
- 0
- Views
- 115
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remnant scar but with toolless tensioners so you don't have to fuss over tying every string perfectly.
Hardware
3 m3x8ish screws
Printing
The tensioners are designed around how much my PETG extrusions shrunk the holes. As long as they come out tight enough for knotted fishing line to not pass, you're good.
Assembly:
Screw in the tensioners until they have enough resistance. Take some string about thrice the length of the scar, poke both ends through the body and feed them out to the cap (angle them to go out the vents then feed them back out to the cap). Loop the ends together around the tensioner then through the hole. Poke a needle through the hole to widen it a little if necessary, but avoid overdoing it. Tie the string so the knot is large enough to not slip through the tensioner (an overhand knot using both ends of the string as one works for me).
Update:
9-24-2025: added missing files :P
11-2-2025: added longer body for 35cm barrels