Pixel 6 Pro Stand
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.11 – €0.13 net (excluding VAT)
For file: Stand_5mm_wide_0.6n_0.3mm_PETG_MK3S_6m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.12 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Pixel 6 Pro Stand for propping up the phone on a nice angle. Great for travel or use on an airplane.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 48
- Makes
- 0
- Views
- 737
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Pixel 6 Pro Stand for propping up the phone on a nice angle. Great for travel or use on an airplane. The stand uses multiple small legs which can optionally be connected and use a magnet to stick the stand to the phone. 1 leg will work well enough to hold the phone up, 2 legs are suggested for rougher environments. The leg and connector can be easily disconnected for travel.
Printing Instructions
- I suggest using PETG for strength
Part Links
If you want to add a magnet to the connector it helps hold the stand to the phone.
Assembly Instructions
- If using a magnet rough up the bottom side for better adhesion. Used silicon (flexible) to adhere.
- Simply click the connector into the stand arms