Covered Toothbrush holder /UVC sanitizer

This is a two part print .

screw or double sided tape to wall. A E275-3-S UVC LED Chip on a board with a 3W LED driver to sanitize the toothbrushes inside prior to use.

https://www.intl-lighttech.com/products/e275-3-s-uvc-led-chip-board?msclkid=97931a778a091d6a1238786b9e7ce56e&utm_source=bing&utm_medium=cpc&utm_campaign=Bing%20Shopping&utm_term=4585719404480214&utm_content

Amazon.com: 12MM Waterproof Momentary Push Button Switch 15PCS ON- OFF Switch (5 Colors) : Industrial & Scientific

After further research, I determined that 15 seconds was not fully adequate to kill all germs, and that 2 minutes was really required to sanitize with UV-C.

So, I added a schematic of 2 minute on timer to be connected to the button, UV/C component, and a 12 vdc power supply, this circuit is using an R/C timing circuit  that triggers a transistor that controls the second transistor to keeping the UV-C LED on until capacitor discharges based on the setting of the variable resistor (100K potentiometer).

Caution: 

DO NOT expose your eyes to UV-C light.

Ensure your circuitry is properly connected and insulated and utilize a AC mains to 12VDC wall transformer power supply on a properly functioning GFI outlet.