1 / 3
Tool to hold 3 MM Bolt Nuts in place on Wanhao i3 style frame — image 1
1 / 3

Tool to hold 3 MM Bolt Nuts in place on Wanhao i3 style frame

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple tools to hold two or four 3 mm bolt nuts in place for the i3 / duplicator style frame.

Rating
0 / 5
Likes
0
Downloads
8
Makes
0
Views
106
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Simple tools to hold 3 mm bolt nuts in place for the i3 / duplicator style frame. It holds 2 or 4 nuts in the needed pattern to match the bolt holes in the frame.

The 4 square is for the front bolt pattern at the top of the frame uprights.

The butterfly is the 3 sets of bolt holes running from top to bottom on the side of the frame uprights. The two holes at a diagonal closest to the center are for the two offset bolt holes at the top and bottom. The two holes next to each other farthest from the middle are for the two parallel slots where the Z axis switch mounts. The center bar holds the tool the correct distance to line up the holes. It is mirrored for both sides of the frame.

Print Settings

Rafts:

No

Supports: 

No

Resolution:

0.2

Infill: 

100%

Tags