1 / 1
Snap-Lock Mini Xacto Knife Handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
locking Xacto knife handle based on the Sardine Knife by Jimmytronics
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 36
- Makes
- 0
- Views
- 448
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Description:
This is a 3D printable version of the Sardine Knife by Jimmytronics, which I modeled in Fusion 360. All credit goes to them for the design of this model.
As always, I am not liable for any injury that is caused by the use of this model. PRINT AND USE AT YOUR OWN RISK.
Hardware:
- 4x M2x6 Countersunk Screw
- 1x 5x20.5mm Extension Spring
- 1x NR-11 Xacto Knife Blade (Only works with this exact blade size)
Print Settings:
- 0.4mm Nozzle
- 0.2mm Layer Height
- 100% Infil
- No Supports
Assembly:
Note: Use a pair of pliers to straighten out the rings on either side of the extension spring so that it matches the spring in the picture below
