1 / 3
Clothes drying rack ramp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A ramp for a drying rack to allow robot vacuums to pass over it
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 51
- Makes
- 0
- Views
- 405
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A ramp to allow for robot vacuums to be able to get over the legs of a drying rack.
The cutout is 16mm diameter, which snaps perfectly in place on my rack which is ~16.2mm.
Can be printed with 1 perimeter for less filament usage, which impacts quality but is still 100% functional (See pictures for 1 vs 2 perimeter difference).
1 perimeter and 5% infill used 35g (12m) of filament, while 2 perimeters and 5% infill used 48g (16.31m).
If it doesn't fit on your bed (Barely fit on my 250x250 bed), cut it in half in your slicer, shouldn't make a difference.