1 / 6
Life Bar (16 pips) Parts Storage and Display for Kotobukiya Rockman X Models (Ver 1.0) — image 1
1 / 6

Life Bar (16 pips) Parts Storage and Display for Kotobukiya Rockman X Models (Ver 1.0)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Summary

This is a project I had in the back of my mind for a while. This is a storage box used to store all the extra parts your Kotobukiya Rockman X kit comes with. It doubles as a life bar effects piece that can be displayed along side your model.

Options

The box is defaulted to the standard “16 pip” size life bar from the SNES games. Optional insert for full life and only 4 pips is included.

The door pops in place. I included a few versions to meet your preference: A right handed swing, a left handed swing, both with or without face plate mounts.

There is a 3mm peg hole on each end of the life bar that can be used with Kotobukiya's New Flying Base, or like display stands.

Print Settings

The life bar looks snappy if you change the color mid print, with a black back ground and yellow foreground. In PrusaSlicer, at 0.25mm Structural settings, the life bar comes out to 10 layers. Layer 7 is the best layer to change colors.

The lids are printed best face down, with 0.1mm Fast Detail in PrusaSlicer and supports on build plate. Supports on the latch are  optional.

The box is best printed back down, and support on the latch is recommended.

Print the Parts Tree flat, to prevent weak layer lines on the pegs. It's designed to be printed that way (taking a few lessons from the Dummy13)

Notes

Everything is designed to snap in place with no glue. As such, the parts on the face plate are a tight fit. What I did to make it work was I pushed them in enough to get started and then I placed them face down on a wooden countertop and snapped em into place. This works best when the box is assembled first.

The parts tree is printed with 3mm pegs for hands and a single 5mm peg for other options. It also has a single right angle mount for the alternate arm parts.

To Do

I originally thought of putting a removable drawer inside. But since I don't have 3D models of the original model parts,  I opted to include a parts tree instead. At some point, I might make additional trees for other models.

I WILL make an Axl version of the life bar. And probably a Maverick version as well. But that's for later.

Tags