4-Lines Pico MMU hub for Protoxtruder v2.0
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapt PICO MMU filament hub to be bolted on Protoxtruder v2.0
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 21
- Makes
- 0
- Views
- 364
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Introducing redesign on awesome LH 4-Lines filament hub so it could be bolted on top of the Protoxtruder 2.0.
Includes protoxtruder 2.0 front with a mouning holes and 2 variants of the filament hub. Did some redesign of the ball hole to eliminate stuck when filament is pressed on top of the ball which I've met because PTFE tube is not going from the top.
Printing: I've used suggested printing settings posted on LH wiki page
You will need 1 M3x8 bolt, 1 M2x8 bolt and 1 heat insert to mount filament hub on top of extruder.
Please use stl files to print hub because step includes non-manifold edges.
