Salt-shaker-funnel / Salz-Streuer-Trichter
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.91 – €1.11 net (excluding VAT)
For file: Salztrichter fuzzy_0.2mm_PLA_MK3S_1h8m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.01 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 1.14 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Funnel for salt shaker
- Rating
- 4.5 / 5
- Likes
- 5
- Downloads
- 28
- Makes
- 2
- Views
- 113
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
EN:
There is packaging for “Bad Ischler Salz” that also serves as a salt shaker. As 500g and 1000g refill packs are also sold, I wanted to design a funnel for the outlet of the shaker, as it cannot be opened. I adapted the funnel to the sausage-shaped outlet of the shaker. In order to print a funnel with the actually solid model, the printing parameters must be adjusted as follows:
Material: PLA
Layers: 0.2mm
Perimeter: 3
Infill density 0%
Horizontal contour shells: Solid layers top + bottom: 0
Seam position: Random
Fuzzy skin: Outer walls
In addition, I positioned a modifier in the PrusaSlicer on the filler neck to disable the fuzzy skin there. This is included in the 3mf file. Furthermore, the settings listed above are specified in the .gcode file.
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
DE:
Es gibt für das "Bad Ischler Salz" eine Verpackung sdie gleichzeitig ein Salzstreuer ist. Da auch 500 oder 1000g Packungen zum Nachfüllen verkauft werden, wollte ich einen Trichter für die Öffnung des Streuers konzipieren, da das Ding nicht zu öffnen ist. Den Trichter habe ich an die wurstförmige Öffnung des Streuers angepasst. Um mit dem an sich soliden Modell einen Trichter zu drucken müssen die Druckparameter wie folgt angepasst werden:
Material: PLA
Schichten: 0.2mm
Perimeter: 3
Fülldichte 0%
Horizontale Konturhüllen: Massive Schichten oben + unten: 0
Nahtposition: zufällig
Fuzzy skin: äußere Wände
Zusätzlich habe ich einen Modifizierer am Einfüllstutzen positioniert um dort die Fuzzy skin auszuschalten. Dies ist in der 3mf Datei angebracht. Des Weiteren sind in der .gcode-Datei die oben angeführten Einstellungen festgeschrieben.