1 / 6
Eibos Easydry or EnCuerdas oled mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an ssd-1306 oled screen mount I made for my filament dryers. I was inspired by 6d6178.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — NoDerivatives
This is a idea to put a temperature sensor on my Eibos and my Eibos Clone (EnCuerdas). I used a WeMos D1 mini v4 and a aht10 temp and humidity sensor.
To mount the screen melt the pegs down over the oled. I used a little super glue in the corners to mount the cover to the base and 2.5mm screws to mount the base to the dryer.