1 / 1
Filing cabinet drawer divider for filament storage
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I use a Filing cabinet to store my filament. The drawer divider keeps the filament from rolling around.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 16
- Makes
- 0
- Views
- 279
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Slicer settings
Filament: PLA
Nozzle: 0.4mm
Layer height: .2mm
Infill type: Gyroid
Infill percentage: 20%
Wall count: 4
Top layer: 5
Bottom layer: 5
Estimated 314.28 g 8h 13m print time.

Using filament cut 3 pins roughly 15mm long to use for alignment when gluing the parts together.


I recommend using double sided tape to hold the assembly centered in the drawer.


