Reversible Filler Spool Holder Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This stand allows the spool holder to be mounted on either side
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted the feet from my spool holder to be out of the way on my enclosure, so I adapted the original stand so that it has a “normal” (free standing) and “reverse” (requires the stands feet to be held in place - the link is below for a matching mount). The securement cap is required when using the spool holder stand upside down. Use an M3 heat-set insert in the center hole in the top of the stand, and secure the cap with an M3x6mm thumbscrew.
Tree (Auto) needed for the slots in the stand
15% infill, 4 walls, top & bottom
Print with PETG or higher for strength
https://www.printables.com/model/1414712-filler-stand-mount
https://www.printables.com/model/1414694-filler-spool-holder-360deg-rotating-adapter