NexGen3D: Home Assistant Control Panel - Dell Latitude Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple aesthetically pleasing wall panel
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 27
- Makes
- 1
- Views
- 670
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This one is a little more refined over my Surface Pro mount as I own and use these Tablets, and have several mounted around my house.
I have tested this with the following tablets:
- Dell Latitude 7200 2 in 1
- Dell Latitude 7210 2 in 1
I suspect others may fit, but I cant confirm as I do not have access to them.
You can mount vertical or horizontal, its easy to install and remove the tablet from the mount.
When using one of these as a Home Assistant control panel, I recommend enabling the battery saver mode in the BIOS, you can set the battery charge to 65% maximum, this will stop the battery from failing and going swollen like on you.
For the OS, I highly recommend Windows 10 or 11 IOT LTSC Enterprise, 11 is a little better for a touch device, these units also fully support Linux like Fedora KDE.
I also recommend using Firefox with the PWA addon, this will give you a better result than a Chrome based browser for local http only GUI's.
I recommend printing the wall mount in a PETG-CF for a little more stiffness, and the bezel from a standard PETG to give it flexibility, but you can also use PLA+ if you like, mine is printed in PETG-CF and the bezel is printed in a Matte White PETG-GF.