PTFE tube connector for PolyDryer drybox
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.08 – €0.10 net (excluding VAT)
For file: Dryerbox connector_0.4n_0.2mm_PLA_COREONE_6m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.09 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Connects a 4mm PTFE tube a to PolyDryer drybox and ensures the tube isn't pulled inside by the rewinder spool.
- Rating
- 4.833 / 5
- Likes
- 61
- Downloads
- 339
- Makes
- 5
- Views
- 1,257
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
This connector fits into the opening of the Polymaker PolyDryer dryboxes and attaches to the smaller 4mm PTFE tubes. This is useful for boxes that are equipped with an auto-rewinder spool and ensures the tubes are not pulled inside (this is not a problem for the larger 6mm tubes).
It may also be used to increase friction (lower InnerDiameter appropriately in the f3d file parameters). This allows you to use PolyDryer dryboxes with auto-rewinders as buffers for the MMU3 (which is otherwise tricky as the spools pull the filament out of the MMU).
No supports are required. Tested with PETG, but PLA should work too (adjust tolerances in the f3d file if needed: InnerDiameter for the filament, TubeDiameter for the PTFE tube).