Canada Strong!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yet again, I employed my enthusiasm for my hobby to the love of my country with this Hueforge creation
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 11
- Makes
- 1
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Although this is sliced for a multi-tool 3Dprinter, you can print this on most 3D printers either with a single extruder / AMS set up or manual filament changes.
I have put “mouse ears” on the corners to prevent warping. They can be easily clipped off after printing
*You may have to scale the X and Y axis down to fit your printer but, DO NOT scale down the Z axis or this print will not work. After doing a global scale reduction (or enlargement), manually set the Z height to 2 mm
NOTE: There is a custom layer height setting (0.2mm per layer) from 0mm to 0.4mm to speed up the print. You can print the model without this but it will take much longer.
I used the following PLA filaments:
- Polymaker Panchroma Army Brown
- Polymaker Polylite Wine Red
- Prusament Vanilla White
Set the first layer at 0.2mm and all other layer at 0.08mm
Filament changes / swaps should be sliced at the following layer heights:
- Start with brown
- at 1.12mm swap to red
- at 1.52 swap to white
*** THIS MODEL IS IN NO WAY TO BE USED FOR COMMERCIAL SALES OF ANY KIND ***
Follow me on:
Instagram.com/ozzy_artist
Printables.com
https://www.facebook.com/ozzy.arty
Twitter: @Ozzy_The_Artist
Your support through my Printables Club would also be appreciated :o)