WeeKey 9K
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A DIY macropad with firmware and control software that can be found at: https://github.com/naomisilver/weekey
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 1
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
WeeKey 9K is a DIY macro pad designed over the span of about a week or two. made to use a Raspberry Pi Pico (or similar MCU) for basic input and control software for macro assignments. The full build guide and code can be found on my github here: https://github.com/naomisilver/weekey
- Printed uses SUNLU PLA+
- 10% infill
- 0.2mm layer height
- 2 perimeters
Aside from the mounting stems which are intended to be tapped/screwed directly into, everything else is designed to be press fit so depending on how calibrated your printer is, you may need to scale certain parts at +-1% scale.