ESRack Fritz!box 7490 module
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A sweet home for the Fritz!box in my rack
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 350
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A place for my Fritz!Box using the excellent ESRack system by @EvilProphet.
It's a huge print, it barely fits on the bed of my Sovol SV08… but the width of the Fritz!Box is larger than a 50% module, so I went this route. If you try using your slicer's cut feature: Please post your make and comment on the result.
There are slots for using the wall mount to fix the Fritz!Box in place. I used some 20 mm M3 screws with hexagonal heads, which fit fine.
Please beware that even this print is just one rack unit high, the antennas exceed this height and protrude to a second unit.
If you want to go fancy and route the four ports to the front, use some 50 cm patch cables and the Keystone module by @NightSky_27577. I did so in my picture, I simply used my slicer to close four of the openings.