1 / 4
Vision engineering mantis bulb covers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These were printed from petg, maybe resin would be better, but i did print 0.1mm layers, so the "lens" gets two layers, you should dry your filament and print really slowly the first two layers.
You might need to trim the right side panel gap a bit, this was a bit tight, fit. I'll reupload it later with better fitment,