Tineco vacuum straightjacket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tineco "floor one S5 combo" vacuum straightjacket
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 48
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
My first thing I publish.
My vacuum has fallen and the motor do not stand anymore on the vacuum waste tank.
I did a straightjacket to keep them closely together and don't split any time I move.
I printed it in PETG 0.2mm 25%infill 5walls auto tree supports
You will need 2 metal parts to fix hinges like wire, nail, paper clip or whatever you find strong enough and slim to fit in
I used the clasp from here : https://www.thingiverse.com/thing:5753587
This thing is hard to put on, hard to remove but save my nerves !
If you need I can provide fusion3D file, you will sure understand it's really my first 3D draw ! :DMy first thing I publish. My vacuum has fallen and the motor do not stand anymore on the vacuum waste tank. I did a straightjacket to keep them closely together and don't split any time I move. I printed it in PETG 0.2mm 25%infill 5walls You will need 2 metal parts to fix hinges like wire, nail, paper clip or whatever you find strong enough and slim to fit in I used the clasp from here : https://www.thingiverse.com/thing:5753587 This thing is hard to put on, hard to remove but save my nerves ! If you need I can provide fusion3D file, you will sure understand it's really my first 3D draw ! :D