Kyosho Lamborghini Miura Concept Display Base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A base for Kyosho Lamborghini Miura Concept, it should work with all Kyosho Lamborghini Miura Concept releases.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 55
- Makes
- 0
- Views
- 747
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068
Custom display base are also available from $5! Contact me to discuss what you want!
If you like my work, you can support me Printables Clubs! Just click the “Support & Join” button beside my name or here: https://www.printables.com/@GigaPenguin#join:279
Exclusive models are included too!
You can also support me through Patreon too: https://www.patreon.com/gigapenguin3dprints/posts
Description
The display base is separated into 3 parts for easy printing and colour swap. The parts are:
1) Name plate (NamePlateAssem.STL)
2) Base (BaseV2.STL)
3) Base back wall (BoxBackAssemV2.STL)
Print Settings
Nozzle size = 0.4 mm (minimum, smaller better)
Layer height = 0.2 mm
Filament change layer for colours on "BaseV2":
1) Start (Bottom stripe, mine is in red)
2) Layer 6 (Middle stripe, mine is in white)
3) Layer 11 (Top stripe, mine is in red)
4) Layer 16 (Overall base colour, mine is in white)
Filament change layer for colours on "BoxBackAssemV2":
1) Start (Bottom stripe, mine is in red)
2) Layer 4 (Top stripe colour, mine is in green)
3) Layer 9 (Center stripe and overall background colour, mine is in white)
4) Layer 19 (Miura Concept and Lamborghini logo background colour, mine is in black)
5) Layer 24 (Lamborghini logo details, mine is in yellow)
Filament change layer for colours on "NamePlateAssem":
1) Start (Overall name plate background colour, mine is in white)
2) Layer 11 (Kyosho logo background, mine is in red)
3) Layer 16 ("Kyosho" lettering, mine is in white)
4) Layer 21 ("DIE-CAST MODEL COLLECTION" lettering, mine is in black)
Assembly
The car is screwed back using the original screw from Kyosho.
Back plate should slide in nicely into the display base. The name plate might need some trimming to the side to fit into the box.
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.