1 / 1
Rounded filament feed funnel for Prusa XL — image 1

Rounded filament feed funnel for Prusa XL

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a rounded version of the funnel that allows filament feeding from the bottom spool holders without a sharp edge.

Rating
0 / 5
Likes
2
Downloads
9
Makes
0
Views
94
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

The dirty little secret of filament funnels for the XL is that they push the input point of the filament forward and have a sharp edge, so they can have lots of feed issues, especially with flexible filaments, and especially for filaments on the lowest spool on each side of the printer.

I specifically designed a funnel profile that has a large, rounded exterior to give the filament a smooth path to enter the feeder.  I have also rounded all edges contacting filament and chamfered other edges to allow a simple print with no supports required.

Recommend printing with 0.4mm nozzle with 0.15mm layer heights on a speed profile. For me, that meant a print time of about 7 minutes using 15% Support Cubic infill.

STEP file provided for high quality slicing. It should import perfectly into any modern slicer.  Just print with the fat end down.