Prusa XL tool offset calibration pin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
in case the original is lost this tool can be used to calibrate the multi-tool prusa xl tool offset.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 268
- Makes
- 1
- Views
- 763
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Of course being a machined metal part the original calibration pin is more precise and only costs little money, but in case you've lost it and urgently need to calibrate your multi-tool prusa XL you can use this as a replacement.
To ensure the upper edge is as precise as possible print in PLA with the thread facing down, brim enabled. 0,3mm Nozzle, 4 Perimeters + 0,12mm layers recommended. After removing the brim use a file to remove any of its residues and screw the pin a few times into a normal M5 nut to ensure the thread works well.