1 / 3
65W USB-C PD DC board case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case with cable strain relief for the ubiquitous 65W USB-C boards available from AliExpress and Amazon.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 94
- Makes
- 0
- Views
- 430
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A case for 65W USB-C PD boards that take 8-30V DC input. The board I used is here (see picture below)
https://amzn.eu/d/glfAvNE
I used mine to make a custom power supply for a ZimaBlade to run from a router UPS with a 12V 3A DC barrel jack output.
The design has built in strain relief for the cable (just use a zip tie), the screws are all M2 screw 4-5mm in length should work (to hold the board down and the lid on).