1 / 5
35mm Dinrail holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Set Of different Din-rail holders compatible with Din-rail 35mm/7.5. compatible with B17 connectors.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 43
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Set Of different Din-rail holders compatible with Din rail 35mm/7.5.
compatible with B17 connectors. with squire mounting.
Din rail is orientated at an angle of 120 degree.
Lowest point of the Rail is 72mm up from bottom of holder.
Total size is 190x114x18mm (lxhxd)
Best printed on side with following settings:
- Perimeters: 5
- Solid layers:
- Top: 5
- Bottom: 5
- Fill density: 8%
- Fill Pattern: Rectilinear
- Supports: None.
Optional for DInRail35_Holder_R/L_B17 Paint on supports can be done for the B17 connector mounting hole when laying flat on bed with closed din-rail on the bed.