1 / 5
Hyperpixel 4 display holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hyperpixel 4 display holder for mounting on the cabinet. In this case, IKEA Platsa is used.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 44
- Makes
- 1
- Views
- 1,165
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Hyperpixel 4 display holder for mounting on the cabinet. In this case, IKEA Platsa is used.
If you are interested in this cabinet, I recommend the models Ikea Platsa Modular Dual Prusa Enclosure (MINI/MK3s/Bear)
I recommend using PETG material for printing, but PLA or ASA can also be used. The front part stands out best printed on a granular plate. Supports are not needed. Even the Tunnel printer did without support.
Recommended settings:
- material: PETG
- layer height: 0.2 mm
- support: no
Hardware:
- Display Hyperpixel 4 (Farnell.com, Aliexpress)
- 2 pcs Screws M3x22 (screw length according to plate thickness) (Aliexpress)
- 2 pcs Nuts M3 (Aliexpress)
- Cable Dupont 30cm, 40pin, Male to Female (Aliexpress)