Large pegbasket with Divider
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pegbasket with divider so you can have 2 kinds of pegs and keep them separate
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 24
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This large pegbasket will hold many pegs and the divider allows you to create 2 (or more) compartments so you can have different peg types easily separated. Plenty of drainage.
I printed the ends in PETG and the basket and joiner in TPU95A.
2 x pegbasketside (1 mirror image)
2 x pegbasket
1 x joiner
OPTIONAL
1, or more x divider
Remember to flip one of the ends 180 so they are mirror image in the slicer. Assemble by first joining the two pegbasket halves with the joiner. Use cyanoacrylate to glue these.
Work the tabs into the ends. Make sure you have the ends the right way around so the keyholes follow the profile of the keys. A bit of cyanoacrylate would be well recommended here, at least at the ends and at the join. I put some on all keys.
The joiner just sits in and engages with the mesh.
Enjoy